Products 17-32 of 35
Show
1970-1981 Firebird Trans Am Double DIN Stereo Adapter Bezel
Price: $309.95
View
Availability: In Stock
RAMC Item #: RAMC-FB2DADAPTER -

This listing is for a custom ABS, 3D printed custom double DIN adapter for your 70-71 Firebird Trans Am. You will need to cut out your dash for this to fit, but once installed it will look great and will accept your double DIN stereo or NAV system. We are currently using this same adapter for the custom builds we are doing in house. You will receive this adapter ready to fit into you dash, just some prep and dying to match your dash will be required. Please look over the photos closely to see...

1973 Pontiac Firebird Formula Trans AM Hood Release Cable Kit
Spotlight!
Price: $249.95
View
Availability: In Stock
RAMC Item #: RAMC73BrdCblKt -

Hood Release Cable Kit custom made for 1973 Pontiac Trans Am Firebird. ***This Kit will ONLY work on 1973 Pontiac Trans Am Firebirds*** If you have looked for a replacement you already know how hard they are to find. We at Restore a Muscle car have created a custom made kit to replace this one year only system with sturdy and flawless functionality. This kit includes Heavy-Duty upper and lower brackets that are custom made in the USA. Kit includes One (1) hood release...

1973-1979 Pontiac Trans Am Air Intake Duct Hose
Price: $37.95
View
Availability: In Stock
Item #: CP-1510-02 -

1973 - 1981 Pontiac Firebird/TransAm AIR CLEANER TO FENDER WELL DUCTING DUCT HOSE REPRODUCTION OF THE PLASTIC 4" HOSE THAT GOES FROM THE AIR CLEANER TO THE INNER FENDER PLASTIC AIR INTAKE ADAPTER. 4" AIR INTAKE HOSE made for 1973 to 1979 Pontiac Trans Ams with a Pontiac 400 Engine or 403 Olds with 4" shaker base snout diameter (no 301) Made in the USASuperior in quality compared to other aftermarket hosesMade by using a hot razor knife process to cut the ends and snip back the spiral helix...

1973-79 GM Windshield Reveal Molding 14 Clips
Price: $39.95
View
Availability: In Stock
Item #: CP-1510-17 -

Made of steel. 13/16" x 1" Metro Part Number WF 209 See below for a complete listing of applicable cars

1976-1978 Firebird Trans Am Hurst 2nd Design T-Top Weather-Stripping Trim Caps
Price: $49.95
View
Availability: In Stock
Item #: RAMC-HURST2-Caps -

3D Printed in ABS plastic weather stripping caps for 1976-1978 Pontiac Firebird Trans Am with 2nd design Hurst T-Tops. Fully finished in matte black ready to install both LH & RH. You will receive 4 total caps and use 2 per side. These are impossible to find and we have been reproducing these for our own restorations and for our customers. It may take a few days to have a set ready to ship, so please be patient. We will keep you updated on the shipment of your order. Thanks, Restore...

1976-79 Pontiac Firebird Trans Am Coolant Recovery Tank
Price: $64.95
View
Availability: In Stock
Item #: CP-1510-10 -

WILL WORK WITH PONTIAC OR OLDSMOBILE ENGINES We have 2 different styles of recovery tanks depending on the year of car. (Original steel cradle is not available) *Comes w/ Tank Only* Does Not include the Cap. Please let us know what year your car is at the time of purchase and we will send you the correct tank for that year. ...

1976-79 Pontiac Firebird Trans Am SHAKER SCOOP RETAINER RING
Price: $57.95
View
Availability: In Stock
Item #: CP-1510-16 -

Ring that secures the shaker scoop to the air cleaner assembly. This reproduction ring will replace the original exactly. For use on all 1976-79 models with shaker hoods.

1976-81 Pontiac Firebird Formula Trans AM Air Cleaner Duct Support Bracket
Spotlight!
Price: $18.95
View
Availability: In Stock

Brand New and Made in the USA This bracket is used on the 1976 - 1981 Trans Am, Firebird, Formula, or Esprit. It holds in position and supports the Air-Cleaner cold air duct that extends into the front fender. These are Brand New and made in the USA. They are Powder Coated in a light gray to prevent rust. We process most orders within 24 hours. We have the processing time set at 3 days, but rarely does it take that long. ...

1977-1981 Firebird Trans Am Shaker Drain Hose
Price: $27.95
View
Availability: In Stock
Item #: 15241 -

1977-1981 Trans Am Firebird Shaker Drain Fitting Shaker, Drain, Nipple, Scoop, Fitting, Hose, Factory, Plastic, Hose, Trans Am, Firebird, Molded Rubber,
Price: $27.95
View
Availability: In Stock
Item #: RAMC-SHAKER FITTING -

An ABS plastic, 3D printed reproduction Shaker drain hose fitting for your 1977-1981 Pontiac Firebird Trans Am. The original factory piece was also made of plastic and this is a great quality piece to finish up the proper drain for your Shaker. We also use this piece on our world-class restorations so it has passed the fitment & functionality tests. It is compatible for use with most replacement Shaker drain hoses on the market.

1977-78 T-TOP-HEADLINER MOLDING TRIM
Price: $49.95
View
Availability: In Stock
Item #: RAMC-TTRIM -

An ABS plastic, 3D printed reproduction replacement T-Top headliner molding. These parts install at the edge of the headliner at the rear of the T-top frame. Impossible to find anywhere and this is the simple solution to replacing your damaged or missing trim pieces. Will arrive ready for you to sand, prep & dye to match to your interior.  We also use this piece in our world-class restorations so it has passed the fitment & functionality tests. This has the correct hole for...

1978-81 Camaro Firebird Trans Am Fisher T-Top Retainer Clip Pair
Price: $19.95
View
Availability: In Stock
Item #: CP-1510-04 -

Replace your broken or rusty clips with this Factory Retainer Clip that Mounts on the Body for the T-Top to Lock in Place. This is for 2 Stainless Steel clips (One Side). If you need them for both sides, please mark quantity 2 when checking out.

1979-81 NEW Pontiac Trans Am Firebird Gas Door Smoke- Just Like Original!
Price: $84.95
View
Availability: In Stock
Item #: CP-1510-05 -

SMOKE IN COLOR MADE JUST LIKE ORIGINAL GM WITH RED REFLECTOR ON BOTTOM (DOES NOT INCLUDE HINGE)

1980-81 Firebird Turbo Trans Am Map Pocket Plate
Price: $67.95
View
Availability: In Stock
Item #: RAMC-CONSOLE-DELETE-PLATE -

3D printed, ABS plastic reproduction Map Pocket Delete Plate, Filler Panel with Turbo Light switch option. These are not being reproduced anywhere and if yours is missing this the the perfect replacement for you! If you need the Map Pocket Plate without the Turbo Light switch opening please let us know upon checkout. This listing is for the Filler Panel Plate only and does not include the console or the metal plate inside of the console that it clips into. ...

69-72 Chevrolet-Blazer, K5 Truck & GMC-Jimmy, Suburban Custom Double DIN Stereo Bezel Blazer, Jimmy, Chevy Truck, 2 DIN, Bezel, Stereo, Navigation Center, Custom, Adapter, 69-72,
Price: $325.00
View
review-star review-star review-star review-star review-star
(1)
Availability: In Stock
Item #: RAMC-BEZEL1 -

A custom, 3D printed Double DIN Stereo and Navigation Center bezel for your 1969-1972 Chevrolet Blazer, GMC Jimmy, Suburban or Truck. When updating your Blazer project with newer technology that requires more room than the factory allowed for, this custom 3D printed bezel - adapter will present a more factory like look to your install and be the centerpiece to your modern dash. The design of this bezel will allow for proper fitment for most all double DIN Stereos and Navigation Centers as well...

69-72 Chevrolet-Blazer, K5 Truck & GMC-Jimmy, Suburban Custom Double DIN Stereo Bezel With Vintage Air Option    Blazer, Jimmy, Chevy Truck, K5, Double DIN, Bezel, Stereo, Navigation Center, Custom, Adapter, 69-72, Vintage Air, AC
Price: $750.00
View
Availability: In Stock
Item #: RAMC-BEZEL1_WAC -

A custom, 3D printed Double DIN Stereo and Navigation Center with optional Air Conditioning bezel for your 1969-1972 Chevrolet Blazer, GMC Jimmy, Suburban or Truck. When updating your Blazer project with newer technology that requires more room than the factory allowed for, this custom 3D printed bezel - adapter will present a more factory like look to your install and be the centerpiece to your modern dash. The design of this bezel will allow for proper fitment for most all double DIN...